|
|
|
Splice It Fence Repair
|
|
Crimp 'n Cut Tool - part #T2
|
Splice-It Offers a Quick and Simple way to splice any type of wire - Barbed, Woven, Smooth, Hi-Tensile,etc
.
Only one splice is needed per join!
High quality splice is made in the U.S.A.
Won't crack or pull out like other knock off brands.
The crimping tool has a life-time warranty! |
|
Fix your Fence in 3 Fast & Easy steps.
- Put a fence stretcher on the wire you want to repair.
Cut the slack wire with the Splice-It Crimp 'N Cut tool.
Cut off excess wire, leaving enough wire to extend past the splice 1/2" on either side.
- Put ends of wire through splice.
A plier works great for tapping the splice through the wire.
- Crimp the splice 3 to 4 times with the Splice-It Crimp 'N Cut tool.
Remove the fence stretcher.
Part #LBW . 12.4 to 14 ga. Barbed . 9 ga. Top and Bottom Woven . 9 ga. Smooth
Part #WW . 11 to 16 ga. Woven . 11 to 16 ga. Welded . 11 to 16 ga. Smooth
Part #GB . 15.5 ga. High Tensile Barbed . 10 ga. Woven . 10.5 ga. High Tensile Top and Bottom Woven
Part #SS . 12.5 to 15.5 ga. High Tensile Smooth . 12.5 to 15.5 ga. High Tensile Woven
12.5 to 15.5 ga. High Tensile Top and Bottom Woven
Part #ST . 12.5 to 15.5 ga. High Tensile Smooth . 12.5 to 15.5 ga. High Tensile Woven
12.5 to 15.5 ga. High Tensile Top and Bottom Woven |
|
|
|
|
| |
